Cleanup
Everybody everywhere...
- Make sure the keys are underneath the FELT PADS, not directly contacting the black straps in the case.
- Place the pedals and power cord in the SIDE POUCHES of the case.
- Make sure the cables are coiled properly!
- If you don't know what an OVER-UNDER coil is, watch the video below:
- Remove all the batteries from the in-ear boxes.
- If they are RECHARGEABLE batteries, put them back in the chargers.
- If they are ALKALINE batteries, DO NOT CHARGE THEM.
- Put the boxes, XLRs, and any other equipment back in the In-Ear Monitors box.
- Place the microphones inside their pouches and seal them.
- Turn off wireless microphones.
- Collapse mic stands properly and place them in the closet.
- Turn off the speakers on the rack in the closet.
- If they're left on, they can overheat!
- Switch off the board by hitting "Home" > "Shut Down" > Power button (once you see "It is now safe to turn off your Qu-24.")
- Remove the mini-snake cable, the power cable, and the power bar.
- Coil the mini-snake cable by following the natural coil of the cable and hang it on the top right hook in the closet.
- Put everything back in the closet in its proper home.
- Make sure the loose joint at the power cable is straight, not bent.
- Place the box, power cable, and HDMI cable in the HDMI Extender Kit box.
